How To Installing iPad Wi-Fi Ambient Light Sensor

Source: ifixit.com By : Andrew Bookholt

Use this guide to replace a broken ambient light sensor.

Tools

• Metal Spudger

• Plastic Opening Tools

Step 1 — Display Assembly

• Insert a metal spudger between the top edge of the display assembly and the rear panel assembly.

• Rotate the spudger away from you to release the tabs along the top edge of the display.

• Insert a second metal spudger between the top edge of the display assembly and the rear panel assembly to keep the tabs from snapping back into place.

Step 2

•  With one spudger, work your way along the right edge of the iPad, releasing tabs as you go.

Click On Read the Rest Of This Post To Read Full Guide With Step-By-Step Instructions:-

Step 3

• Lift the display assembly away from the rear panel assembly by its bottom edge.

• Do not attempt to remove the display at this time, as it is attached to the rear panel assembly.

Step 4

• In the following steps, you will disconnect the three cables attaching the display assembly to the logic board. The cables are for the following components:

  • Digitizer

  • Ambient Light Sensor

  • Display Data Cable

Step 5

• Use the edge of a plastic opening tool to flip up the retaining flaps holding the digitizer ribbon cables in their sockets on the logic board.

• Be sure you are flipping up the retaining flap, not the socket itself.

• Pull the digitizer ribbon cables straight out of their sockets.

Step 6

• Use a plastic opening tool to remove the ambient light sensor connector from its socket by gently prying upward.

Step 7

• Disconnect the display data cable from the main board by flipping up the metal retainer by its black plastic pull tab.

• Pull the cable connector away from its socket.

• Pull the connector parallel to the face of the logic board.

Step 8   

• Remove the display assembly from the rear panel assembly.

 

Step 9 —

AmbientLight Sensor

• If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD.
• Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.
• Once you've gained enough clearance, peel the ambient light sensor off the LCD.
• Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off.
• If necessary, attach the plastic view window to your new ambient light sensor before installation.

 
 
To reassemble your device, follow these instructions in reverse order.
 
Sincere Thanks To  Andrew Bookholt  To Make This Easy For Us....
 

DISCLAIMER

We DO NOT host or upload any of the links or any other content that are available on this WEBSITE. We merely search on INTERNET and index popular sites openly available to anyone. These articles and other content are uploaded to the respective websites (FORUMS) by their User Communities from all over the World and NOT by us. Please Contact Us through E-Mail, if you feel that any Content on this WEBSITE are objectionable or violating your copyrights. The objectionable content shall be promptly removed from our WEBSITE. E mail:- how2dothings4u@gmail.com