How to Install Mac OS X on a PC (Without Using a Mac)

Source: Makeuseof.com by Jorge Sierra

There are many great tutorials on the web forusing a Mac to install Mac OS X Snow Leopard on a PC. Unfortunately, you may be unable to follow such tutorials if you do not readily have access to a Mac to perform the preparation necessary for the installation.

Great progress has been made in hacking PCs to run OS X, and it is now possible to install Mac OS X without a Mac. Thanks to some great tools put together by some brilliant hackers, it is also much easier and does not involve nearly as much time and effort as was once required.

 

Step 1: Getting The Hardware Ready

I recently purchased the following set of hardware for the purposes of building a Hackintosh (often PCs running Mac OS X are referred to as such):

• Intel Core i3-530 Clarkdale 2.93GHz
• Gigabyte GA-H55M-USB3 Motherboard
• 4 GB DDR3 1333 RAM (2 x 2GB)
• DVD Burner
• MicroATX Computer Case
• 585 Watt Power Supply
• 4-pin to 8-pin Power Adapter

The motherboard has an 8-pin power connector on it, and although it is possible to connect a single 4-pin connector to it, you may encounter odd issues running with just a single 4-pin connector. To ensure that you provide sufficient power to the board, you should purchase the 4-pin to 8-pin power adapter. Alternatively, you could purchase a power supply with 3x 4-pin connectors (1 for the 20+4-pin main connector, and 2 for the 8-pin connection) or an 8-pin connector.

Step 2: Prepare The Boot Disk

In addition to the hardware and a retail copy of Mac OS X Snow Leopard, you’ll also need a blank CD. You may want to use a rewritable CD if you’re using a different hardware configuration, just in case the first one I recommend doesn’t work for you. There are two boot disk images that will allow you to install OS X directly from the installation DVD:

• iBoot (by tonymacx86 and MacMan)
• Empire EFI (by Prasys)

I successfully used both of them with my hardware setup. However I recommend you try iBoot first, as it is a bit leaner and doesn’t take as long to boot. If you’re using my hardware configuration, be sure to download the iBoot Supported disk image. If you use Empire EFI, download the Empire EFI v1.085 R2 image.

You can use one of many free programs to burn CDs if you don’t have one. Be sure to use the disk image burning mode in your CD burning software. Do not just simply copy the disk image file to a blank CD. I like InfraRecorder, because it makes this very easy. All you have to do is click the Write Image button, select the image, and burn it. Once again, you may wish to use rewritable media if you’re using a different hardware configuration than mine.

Click On Read The Reast Of This Post To Read Compleat Guide With Text & Images:-