How To Installing iPad Wi-Fi Ambient Light Sensor

Source: ifixit.com By : Andrew Bookholt

Use this guide to replace a broken ambient light sensor.

Tools

• Metal Spudger

• Plastic Opening Tools

Step 1 — Display Assembly

• Insert a metal spudger between the top edge of the display assembly and the rear panel assembly.

• Rotate the spudger away from you to release the tabs along the top edge of the display.

• Insert a second metal spudger between the top edge of the display assembly and the rear panel assembly to keep the tabs from snapping back into place.

Step 2

•  With one spudger, work your way along the right edge of the iPad, releasing tabs as you go.

Click On Read the Rest Of This Post To Read Full Guide With Step-By-Step Instructions:-

How To Disassemble A BlackBerry Bold 9000

Source: 

 

Tools required: Torx 5 screwdriver, plastic tool such as a guitar plectrum or credit card.

• Remove your back cover, battery, sim and memory card. Six screws need to be removed, circled below. The battery compartment should now be loose and can be lifted away from the rest of the phone.

• With the battery compartment removed your phone should look like below. Starting at the bottom of the phone, lift the circuit board up and slide it away from the front cover, in the direction shown by the arrows.

• With the circuit board removed your phone should look like below. A ribbon connector (circled) needs to be disconnected. It attaches like a plug and socket. Just lever this up to unplug.

 

You Can Also Watch A Video Disassembly Guide By Videojug.com 

Click On Read The Rest Of This Post For Complete Guide With Text & Image: 

 

 

How to Install a Wireless Card in Linux Using Windows Drivers

Source: howtogeek.com

Linux has come a long way with hardware support, but if you have a wireless card that still does not have native Linux drivers you might be able to get the card working with a Windows driver and ndiswrapper.

Using a Windows driver inside of Linux may also give you faster transfer rates or better encryption support depending on your wireless card.

If your wireless card is working, it is not recommended to install the Windows driver just for fun because it could cause a conflict with the native Linux driver. 

Download Wireless Card Driver

The first thing you need to do is figure out what wireless card you have. There are a couple ways to do this and some involve finding the device chipset and others involve scouring through system logs.

The easiest method is to just look at the device itself, if you have an external wireless card, or search your manufactures website for what wireless card came with your computer, if you have an internal wireless card.